Description
Specifications:
- One-person loading from the ground
- Tows motorcycles weighing up to 600 lbs.
- Made in the USA
- Stainless Steel
- Suitable for vehicle hitch heights 10″-16″ (measured from ground to bottom of vehicle hitch)
- Travels 12″ from its locked position to the ground for loading and unloading
- Works with 2″ hitch and has three adjustable receiver positions
- Minimum 500 lb. towing vehicle tongue weight
- Customized Rear Wheel Cradle Plates – can purchase interchangeable cradle plates for use with multiple bikes. Max width for tire size is 8.1″, select the Option “Larger Tire Size (Greater than 8.1″ Wide)” below if you need a larger set of Cradle Plates.
- Click this link to see the most common tire and tire cradle sizes – Tire and Cradle Sizes for Tow Hitches
- Requires 15″ clearance on motorcycle rear wheel (measured from ground to fender)
- If you plan on leaving any part of your MoTow attached to your hitch, we recommend our locking hitch pin
- Rear Wheel Towing for safety of motorcycle drive shaft
- Minimum 8″ towing height recommended
- Pivots 150 degrees to eliminate leaning on turns
- Uses Standard 18v drill on low speed to raise and lower
- Lab and highway tested
- Weighs 40 lbs.
MoTow Motorcycle Tow Hitch – 18″ Adjustable Includes:
- MoTow® 18″ Motorcycle Tow Hitch with Adjustable Receiver and Customized Tire Cradle
- Hitch Safety Strap and Wheel Straps rated 6,600 lb. breaking strength, 1,100 lb. working load
- 15/16 Socket
- Handlebar Strap Sets
- Reflective Safety Flags
- Grease Packet
- Installation Instructions
- Accessory Bag
- Free Shipping Lower 48 US(ship worldwide)
