Description
Specifications:
- One-person loading from the ground
- Can handle motorcycles up to 600 lbs.
- Made in the USA of Stainless Steel
- Suitable for vehicle hitch heights of 10″-21″ with 2″ hitch
- Travels 16″ from its locked position to the ground for loading and unloading
- Bracket is adjustable up to 5″ up and down
- Customized Rear Wheel Cradle – interchangeable cradle plates for multiple bikes.
- Max width for tire size is 8.1″, select the Option “Larger Tire Size (Greater than 8.1″ Wide)” below if you need a larger set of Cradle Plates.
- Click this link to see the most common tire and tire cradle sizes – Tire and Cradle Sizes for Tow Hitches
- Tire Cradle requires 15″ clearance from the ground on rear wheel
- If you plan on leaving any part of your MoTow attached to your hitch, we recommend our locking hitch pin
- Rear wheel towing for safety of motorcycle drive shaft
- Tire Cradle Assembly Pivots 150 degrees, remaining in upright position through turns
- Uses Standard 18v drill on low speed to raise and lower the lift
- Lab and highway tested
- Weighs 44 lbs.
- Consult your vehicle owner’s manual for your vehicle’s maximum tongue weight limit.
- All RVs require 24″ Adjustable Model due to length behind rear axle
MoTow Motorcycle Tow Hitch – 24″ Adjustable Includes:
- MoTow® 24″ Lift with Adjustable Position Receiver and Custom Tire Cradle
- Hitch Safety Strap
- Wheel Straps rated 6,600 lb. breaking strength, 1,100 lb. working load
- Handlebar Straps
- 15/16 Socket
- Reflective Safety Flags
- Grease lubricant
- Installation Instructions
- Accessory Bag
